Comments on: Umbraco Package: Google Map Macro for the Rich Text Editor http://www.proworks.com/blog/2010/02/13/umbraco-package-google-map-macro-for-the-rich-text-editor/ learn. rinse. repeat Fri, 03 Feb 2012 20:01:57 +0000 http://wordpress.org/?v=2.9.2 hourly 1 By: Andrew http://www.proworks.com/blog/2010/02/13/umbraco-package-google-map-macro-for-the-rich-text-editor/comment-page-1/#comment-3588 Andrew Fri, 03 Feb 2012 20:01:57 +0000 http://www.proworks.com/blog/?p=810#comment-3588 This worked perfectly. Thanks! This worked perfectly. Thanks!

]]> By: Jason http://www.proworks.com/blog/2010/02/13/umbraco-package-google-map-macro-for-the-rich-text-editor/comment-page-1/#comment-3566 Jason Mon, 21 Nov 2011 17:37:31 +0000 http://www.proworks.com/blog/?p=810#comment-3566 Actually, don't unzip the package. Just go to the Developer section in the Umbraco Admin and Install a new package. Then browse to that zip package and Umbraco will take care of it. Thanks, Jason Actually, don’t unzip the package. Just go to the Developer section in the Umbraco Admin and Install a new package. Then browse to that zip package and Umbraco will take care of it.

Thanks,
Jason

]]> By: Sai http://www.proworks.com/blog/2010/02/13/umbraco-package-google-map-macro-for-the-rich-text-editor/comment-page-1/#comment-3562 Sai Wed, 16 Nov 2011 03:27:25 +0000 http://www.proworks.com/blog/?p=810#comment-3562 Hello all, Pardon me if this is a very dumb question. I am very new to Umbraco. I am confused as to where I need to put the xml file that comes as part of the the zipped folder. Hello all,

Pardon me if this is a very dumb question. I am very new to Umbraco. I am confused as to where I need to put the xml file that comes as part of the the zipped folder.

]]> By: LeaUK http://www.proworks.com/blog/2010/02/13/umbraco-package-google-map-macro-for-the-rich-text-editor/comment-page-1/#comment-3430 LeaUK Tue, 24 May 2011 09:53:33 +0000 http://www.proworks.com/blog/?p=810#comment-3430 Hi Jason Not sure why my last post didn't show, but I just wanted to let you know that I tested it in 4.6 (all fine) rather than 4.7 as I mentioned above! But then in 4.7 and it did error (although different to that mentioned above). I simply navigated away from the page with the macro embedded, and came back to find the typical yellow dotted lines representing your macro. Content wasn't rendered even though I had render content enabled. However, the resulting page displays perfect... Cheers - and thanks again Lea Hi Jason

Not sure why my last post didn’t show, but I just wanted to let you know that I tested it in 4.6 (all fine) rather than 4.7 as I mentioned above! But then in 4.7 and it did error (although different to that mentioned above). I simply navigated away from the page with the macro embedded, and came back to find the typical yellow dotted lines representing your macro. Content wasn’t rendered even though I had render content enabled.

However, the resulting page displays perfect…

Cheers – and thanks again
Lea

]]> By: Jason http://www.proworks.com/blog/2010/02/13/umbraco-package-google-map-macro-for-the-rich-text-editor/comment-page-1/#comment-3429 Jason Mon, 23 May 2011 16:20:16 +0000 http://www.proworks.com/blog/?p=810#comment-3429 Thanks Lea! Glad it worked out for you. Thanks Lea! Glad it worked out for you.

]]> By: LeaUK http://www.proworks.com/blog/2010/02/13/umbraco-package-google-map-macro-for-the-rich-text-editor/comment-page-1/#comment-3428 LeaUK Mon, 23 May 2011 16:14:17 +0000 http://www.proworks.com/blog/?p=810#comment-3428 Hi Jason This works a treat, thanks so much. I tried making my own but failed, well I'm still VERY new to all this! Just to let you know I'm running Umbraco 4.7 and it doesn't throw any error and renders fine on both the site and when adding the macro to a text page :) Cheers again Lea Hi Jason

This works a treat, thanks so much. I tried making my own but failed, well I’m still VERY new to all this!

Just to let you know I’m running Umbraco 4.7 and it doesn’t throw any error and renders fine on both the site and when adding the macro to a text page :)

Cheers again
Lea

]]> By: Jason http://www.proworks.com/blog/2010/02/13/umbraco-package-google-map-macro-for-the-rich-text-editor/comment-page-1/#comment-2656 Jason Fri, 08 Apr 2011 16:43:19 +0000 http://www.proworks.com/blog/?p=810#comment-2656 Yea, I see that as well. I'm guessing its a .NET 4 issue. Go to the Macro "Google Map" in the Developer section and uncheck "Render content in editor". That will prevent the error from displaying in the Rich Text Editor after you drop it in. Yea, I see that as well. I’m guessing its a .NET 4 issue.

Go to the Macro “Google Map” in the Developer section and uncheck “Render content in editor”. That will prevent the error from displaying in the Rich Text Editor after you drop it in.

]]> By: Jason http://www.proworks.com/blog/2010/02/13/umbraco-package-google-map-macro-for-the-rich-text-editor/comment-page-1/#comment-2652 Jason Fri, 08 Apr 2011 15:39:52 +0000 http://www.proworks.com/blog/?p=810#comment-2652 Thanks for the heads up. I'll test it in 4.7 and get back to you. Thanks for the heads up. I’ll test it in 4.7 and get back to you.

]]> By: FarmFreshCode http://www.proworks.com/blog/2010/02/13/umbraco-package-google-map-macro-for-the-rich-text-editor/comment-page-1/#comment-2646 FarmFreshCode Fri, 08 Apr 2011 13:35:26 +0000 http://www.proworks.com/blog/?p=810#comment-2646 Hi, I just installed this package into Umbraco v4.7. Once I insert the macro into my post I get this error message: ------------------------------------------------ Server Error in '/' Application. A potentially dangerous Request.Path value was detected from the client (&). Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Web.HttpException: A potentially dangerous Request.Path value was detected from the client (&). Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: ------------------------------------------------ However if I go ahead and save/publish the document everything seems to be working just fine. Is there an issue with v4.7 or do I have bigger issues? Hi, I just installed this package into Umbraco v4.7. Once I insert the macro into my post I get this error message:
————————————————
Server Error in ‘/’ Application.
A potentially dangerous Request.Path value was detected from the client (&).
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: A potentially dangerous Request.Path value was detected from the client (&).
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
————————————————

However if I go ahead and save/publish the document everything seems to be working just fine. Is there an issue with v4.7 or do I have bigger issues?

]]> By: Jason http://www.proworks.com/blog/2010/02/13/umbraco-package-google-map-macro-for-the-rich-text-editor/comment-page-1/#comment-1089 Jason Mon, 15 Feb 2010 15:02:16 +0000 http://www.proworks.com/blog/?p=810#comment-1089 Thanks Lee! BTW, I voted for you for MVP :) Thanks Lee!

BTW, I voted for you for MVP :)

]]>